Designed for pure, effortless hydration, AlkaVoda UV hydrogen bottle uses 3x UV-C LED technology to eliminate bacteria and bio-contaminants, keepingyour water fresh and clean with every sip. 

The Hydrogen Bottle included UV-C light prevents the growth of mold and mildew. It is a safe, chemical-free method of purifying your water and keeping your bottle clean.

Cupbody: Tritan bottle
Capacity: 400 ml
Hydrogen Cycles: 6 mins / 12 mins
With self-clean mode
Battery: 4000mAh (base) /1400mAh(lid)
Voltage: 5V USB
Temperature: 0-60℃
SPE: Quality Titanium Platinum
PEM: Quality ion membrane
Operating：Click Switch
Charging Cable: Type-C Cable
Product size: 74X240mm

How to Work the hydrogen bottle?
(1) Press once to turn on and twice to tumn off.
(2) After turning it on, press it once to display blue light and start electrolysis for 6 minutes. when the electrolysis is completed, the blue light will stop.
(3) Press twice in succession to display blue light and start the 12-minute electrolysis mode. When electrolysis is completed, the blue light will stop.
(4) Press and hold the switch for 3 seconds, the green light will be displayed, and the product will automatically backwash for 3 minutes.
   After self-clean, the green light will automatically stop. The water in the cup should be poured out at this time.

How to work the UV lamp at top lid?
1.The red light turns on when charging, the green light turns on when fully charged, and the blue light turns on when working. lt supports working while charging.
2.Single click works for 3 minutes, double click works for 10 minutes, long press works for 20 minutes.
3. If the cup is tilted more than 30 degrees, the blue light will flash quickly to sound an alarm and the UVc light will be turned off.
4.The low-battery blue light flashes slowly to remind you to charge, and the UVc light remains on until the working time is up.